Hamilton Devices KR1 Bubbler 2-in-1 Vaporizer Battery Mod 500mAh

$64.99
  • Ex Tax: $64.99
  • Product Code: M00001857
  • Availability: In Stock

Hamilton KR1 Vaporizer Battery ModBrand:Hamilton DevicesUnit: setType:Vaporizer Battery ModNet Weight: 75(g)The combined shipping cost will be calcula..

Available Options

Hamilton KR1 Vaporizer Battery Mod

  • Brand:Hamilton Devices
  • Unit: set
  • Type:Vaporizer Battery Mod
  • Net Weight: 75(g)
  • The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

    Hamilton KR1 Vaporizer Battery Mod INTRODUCTION

    Hamilton KR1 Vaporizer Battery Mod is the world's first 2-in -1 vape cartridge and concentrates bubbler. the dual-purpose bubbler allows you to interchange between your thread cartridge and thread cartridge and portable rig. The KR1 is designed for concentrate lovers and is equipped with a high-quality circuit broad and multiply protection to prevent short circuits.The transparent it has with its plastic box piece is used as both the water chamber and the cover for the cartridge or atomizer. The water chamber is located in the glass mouthpiece that has a small fixed stem that lines up with a hole to the cartridge chamber, which makes sure to line this hole up so as much vapor can be water filtered as possible, a third to a half an inch of water is perfect to prevent you from water filtration. It is available for changing your voltage, which presents by blue(3.2V) white(3.6V), and red(4.0V), which is operating by a single button. The clear case allows you to vape with fun and watches the bubbles go.Paired with any 0.5ml or 1.0ml 510 cartridges and is powered by an internal 500mAh battery, KR1 is so portable that it can stay as a desktop vaporizer or on the go.

    Features

    • Dimensions - 156.6mm by 47.5mm by 23mm

    • Integrated 500mAh Battery

    • Resistance Range: 0.5-2.0ohm

    • Stainless Steel, Glass, and PCTG Chassis Construction

    • Intuitive Firing Button

    • Bubbler Function

    • Battery Life Indicator Light

    • Utilizes 510 Threaded Cartridges or Wax Coils

    • Threaded 510 Connection

    • Side MicroUSB Port

    • Available in

    Hamilton KR1 Vaporizer Battery Mod SPECIFICATION

    Size: 47.5mm (L) x 23mm (W) x 156.6mm (H)

    Battery Capacity: 500mAh

    Power: Low = Blue (3.2V), Medium = White (3.6V), High = Red (4.0V)

    Connector: 510 Thread

    Firing Mechanism: Button activated

    Color: Brushed Gunmetal

    *Cartridge not included

    Hamilton KR1 Vaporizer Battery Mod PACKAGE LIST

    1 * KR1 Device

    1 * Concentrate Atomizer

    1 * Scoop Tool

    2 * O-rings

    1 * Charging Cable

    GUARANTEE

    3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

    ORDERING TIPS

    Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!

Write a review

Note: HTML is not translated!
    Bad           Good